Water for Injection (WFI) can be produced using vapor compression distillation. Our distillation equipment satisfies all cGMP and international Pharmacopeia requirements.




Model PSMC: Pharma Still Vapor Compression

Pharma Still Vapor Compression

The PSMC Model produces water for injection that meets all international Pharmacopeia requirements.

  • Optimized energy recovery
  • Feed water can be soft or purified water
  • Low maintenance requirements
  • Entire distillation process is protected against contact with the external environment.
  • Made from AISI 316L stainless steel
  • All internal welding is TIG (Tungsten Inert Gas)
  • All gaskets are PTFE
  • Interface with Siemens PLC and SCADA
  • Industrial steam pressure reduction
  • Automatic sanitation
  • WFI production device 25-90°C
  • WFI production device 25°C
  • Variable WFI production 0-100%
  • Heated vent filter
  • CFR 21 Part 11 software compliance
  • Electropolishing Ra < 0.4 μm


Model RPSMC: Vapor Compression Distiller with Reverse Osmosis

Thermo-Compressor Distillation
  • Low energy consumption
  • Feed water can be any kind of water
  • No cooling water needed
  • Sterile WFI production USP/FDA approved
  • Conductivity outlet: 0.4 μs/cm2
  • Conductivity inlet: max 800 μs/cm2
  • Zero percent distiller blowdown

Model LABSMC: Thermo-compression Distiller for Chemical and Pharmaceutical Laboratories

Laboratory-scale mechanical compression still
  • Simple, compact design
  • Low maintenance
  • PLC for automatic control included
  • Simple installation


  • WFI conductivity analysis
  • High purity level
  • WFI temperature 25°C


Model HPSMC: Horizontal Thermo-Compression Distiller

Horizontal Thermocompression Distiller
  • Simple, compact design
  • Fully drainable
  • Low maintenance
  • Easy to inspect


  • Non-condensable gases can be removed
  • Low energy consumption
  • Completely sanitary